Cookie Img
Back to top
Home » Products » USB Camera » Remote Head

Remote Head

Remote Head
Remote Head
Product Code : STC-RCLC33A-C3
Brand Name : GHANSHYAM ENTERPRISE
Product Description
Product STC-RCLC33A-C3 STC-RCL33A-C3 STC-RCLC33A-R3 STC-RCL33A-R3
Electronic specifications Imager 1/3" interline VGA color 1/3" interline VGA monochrome 1/3" interline VGA color 1/3" interline VGA monochrome


progressive CCD: ICX424AQ progressive CCD: ICX424AL progressive CCD: ICX424AQB progressive CCD: ICX424ALB
Total picture elements 692 (H) x 504 (V)
Active picture elements VGA: 648 (H) x 494 (V)
Chip size 5.79 (H) x 4.89 (V) mm
Cell size 7.4 (H) x 7.4 (V) µm
Scanning system Progressive
Scanning method Full scanning, Full scanning, Full scanning, Full scanning,


Partial full scanning, Partial full scanning, Partial full scanning, Partial full scanning,


1/2 partial scanning, 1/2 partial scanning, 1/2 partial scanning, 1/2 partial scanning,


1/4 partial scanning, 1/4 partial scanning, 1/4 partial scanning, 1/4 partial scanning,


Variable partial scanning Variable partial scanning Variable partial scanning Variable partial scanning



Binning, Binning partial scanning,
Binning, Binning partial scanning,



Binning 1/2 partial scanning,
Binning 1/2 partial scanning,



Binning 1/4 partial scanning,
Binning 1/4 partial scanning,



Binning variable partial scanning
Binning variable partial scanning
Vertical frequency (Frame rate) 94.784 Hz
Horizontal frequency 47.2028 kHz
Pixel frequency 36.8181 MHz
S/N ratio @8bit output <= 3 Digit (Gain 0 dB)
(standard deviation) @10bit output <= 10 Digit (Gain 0 dB)
Minimum scene illumination
0.11 Lux at F1.2
Sync. System Internal / External
Video output Digital 8 or 10 bit Camera Link (Base configuration)
Tap 1 Tap
Shutter speed OFF, 1/2 to 1/100,000 sec. (Variable at every H and clock)
Gain 0 to 27 dB
Gamma 1.0
Power supply Input voltage 12Vdc ± 10%
Consumption Less than 3.5 W
Trigger mode Edge preset trigger (V-reset, Non-reset), Pulse width trigger (V-reset, Non-reset)
Communication RS232 via Camera Link connector
Mechanical specifications Dimensions CCU 28 (W) x 28 (H) x 36.5 (D) mm excluding the connector

Head 17 (W) x 17 (H) x 16.9 (D) mm 12 (W) x 12 (H) x 44 (D) mm
Optical filter No IR cut filter
Optical center accuracy
Positional accuracy in H and V directions: +/- 0.31 mm, Rotational accuracy of H and V:+/- 2.1 deg.
Material Case Front, base and rear: Aluminum die cast (ADC12), Cover: Steel sheet covered with zinc
Tripod Polycarbonate ABS
Lens mount M10.5 (P=0.5) (Male screw)
Interface connector Camera Link connector: SDR connector, Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent
Weight Approximately 150 g
Environmental specifications Operational temperature -5 to 50 deg. C
Storage temperature -30 to 65 deg. C
Vibration 10Hz to 150Hz, 0.35 half amplitude (Maximum acceleration 50m/s2), 3 directions 8 times each
Shock Acceleration 150m/s2, 6 directions 10times each
Standard compliancy EN61326: 1997/AnnexA+A1, 1998 (EMI: Class B)+A2:2001
RoHS RoHS compliance